Hose, Coupling, and Fittings

Hose, couplings, and fittings used on all Hennes-Johnson high pressure spray equipment are engineered to meet exact pressure, flow, and safety requirements. Alterations to the design by the installation of non-approved, underrated, incorrect, or inferior components may cause severe personal injury, and/or loss of equipment performance. When replacing any high pressure component, call Hennes-Johnson toll free at (800) 249-1349 to obtain proper pressure, flow, material composition, and size requirements. We will be happy to give you the correct specifications with no obligation along with our competitive current pricing for your consideration.
Part Number Working Pressure Rating Inside Diameter Length Description/Use HJ200-15TS 5000 psi 1/2 in. 15 ft. whip end - A, B HJ200-50TS 5000 psi 1/2 in. 50 ft. transfer - A, B HJ200-100TS 5000 psi 1/2 in. 100 ft. transfer - A, B HJ210 5000 psi 1/2 in. 25 ft. transfer - A, B, C HJ211 5000 psi 1/2 in. 50 ft. transfer - A, B, C HJ220 250 psi (low pressure) 3/4 in. 30 ft. transfer - A, B, C HJ221 250 psi (low pressure) 3/4 in. 30 ft. transfer - A, B, C HJ201-7.5 2250 psi 3/4 in. 7.5 ft. hydraulic - A HJ201-50 2250 psi 3/4 in. 50 ft. transfer - A, B HJ201-100 2250 psi 3/4 in. 100 ft. transfer - A, B HJ201-50TS 4000 psi 3/4 in. 50 ft. transfer - A, B HJ201-100TS 4000 psi 3/4 in. 100 ft. transfer - A, B
Material guide for hose selection.	(A) Mild solvent based materials. i.e.: Asphalt Primers, Solvent based aluminum coatings (fibered/non-fibered), Asphalt cut-backs, Mastics, SBS Modifieds. (B) Water based materials. i.e.: Asphalt emulsion, Acrylics (C) Aggressive solvent based materials. i.e.: Bonding Adhesives, Solvent based elastomeric.
	BULK TANK ADAPTER PARTS A. BULK ASSY. 3" suction tube assembly B. BULK CLAMP Motor & Pump adapter C. 3pbv 3" full port ball valve D. 3FCX3MP 3" female cam lock connection E. 3MCX3MP 3" male cam lock connection F. 2045-32 2" m/f swivel connector

Previous Page

Next Page